snake
Rookie Baller
Posts: 129
|
Post by snake on Nov 22, 2012 12:22:10 GMT
Unsure how to send a private message so i will just post it here for ironhide to send onto dave the mechanic.
================================================================== Hello. I am having some problems with my creed and was pointed your way by some of the guys from Northants giants.
My gun when gassed up will throw the bolt forward and vent the gas down the barrel and up through the hopper port. If the gun is on it will fire but the still throw the bolt forward and not make it return, it makes a cracking sound when the bolt moves when you fire. also the gun wont fire on every trigger pull, the trigger is hitting the switch leaver on each pull. It was working fine until last week when i tested it out, i have taken the bolt and metal rod that the bolt locks into out and have unscrewed the front rocket thing under the barrel. I bought it 2nd hand and had it looked at and rebuilt in june 2012 as it was in a bad way. the shots fired are 89003
creed ARV, version 1.01, made in 2010 by "DH" and checked by "jason"
I dont have a postal address cos i live on a boat but do drive so can meet you in MK. Please can you let me know how much it will cost cos i may have to save up to get it fixed
thanks for your time.
Steve nake
|
|
|
Post by ironhide on Nov 23, 2012 12:36:46 GMT
Hi Andy,
Its an easy fix that he can do himself.
Get him to swap the 0 ring on the rammer to an 011 regardless of the condition. And i bet the solenoid is pluged in the aux port, needs to be plugged into the top socket. Wind the lpr all the way out, hpr 1 full turn from flush, then slowly screw the lpr in till it cycles. at 90k shots i would advise swapping th popet head 0 ring too.
If he wants to send it to me for a servivce its £20 + parts needed. Full report given back and worked will be logged on the Vanguard service data base and will be covered under waranty should it happen again.
Built by "DH" Means i built it at Vanguard HQ. If he needs an 0 ring kit they are £10 and are 100% genuine Vanguard 0 rings with british standard sizes inc.
Dave
|
|
|
Post by GodForbid on Nov 23, 2012 13:11:16 GMT
Lol that's pretty cool that he's the one that actually built the gun. Bet you never expected that aye Steve?
|
|
|
Post by morphmann on Nov 23, 2012 15:50:47 GMT
Technically is it not therefore Dave's fault? ?
|
|
snake
Rookie Baller
Posts: 129
|
Post by snake on Nov 23, 2012 19:02:26 GMT
OMG, I have just pent the afternoon putting my gun back together following the message Ironhide posted and my my GUN IS FULLY WORKING. This mechanic knows his stuff as i did have one of the plugs plugged into the aux socket No leaks no miss shooting perfect. So my thanks go to everyone who posted help and to Ironhide for being the middle man. Im playing at finmere tomorrow so will post up how i got on and if i have any problems. ================================== Ironhide, please can i arrange the gun to be dropped to you or dave to get this poppet thing sorted?
|
|
|
Post by ironhide on Nov 23, 2012 19:21:32 GMT
Thats good bud happy to help BUT whats this at the bottom
Ironhide, please can i arrange the gun to be dropped to you or dave to get this poppet thing sorted? DOES THIS STILL NEED DOING IF SO YOU CAN DROP IT OFF AFTER FINMERE AS IM JUST OF THE A421 IN MK
|
|
snake
Rookie Baller
Posts: 129
|
Post by snake on Nov 23, 2012 19:37:03 GMT
Thats good bud happy to help BUT whats this at the bottom Ironhide, please can i arrange the gun to be dropped to you or dave to get this poppet thing sorted? DOES THIS STILL NEED DOING IF SO YOU CAN DROP IT OFF AFTER FINMERE AS IM JUST OF THE A421 IN MK I want it doing but i cant afford to get it done this week cos im in belgium next week and i need to buy oil and wood for my boat next sunday and if the canal freezes i will need money for butane. I will post up how the gun was after tomorw
|
|
|
Post by ironhide on Nov 23, 2012 19:38:52 GMT
ok bud just let me know when your ready
|
|